Ps3 eye cam ir filtr
![ps3 eye cam ir filtr ps3 eye cam ir filtr](https://cdn.thingiverse.com/renders/5c/8f/d5/f5/1f/c501054466e904ec8fbc279265b93fbd_preview_featured.jpg)
Now you’ll have a full access to the camera’s PCB. To remove the front cover of the camera, remove another four screws. In addition took a closer look at this camera’s chipset.įirst remove the four screws at the back of the camera.Īfter carefully removing the back cover, you will see the camera’s main board. We recorded the whole process in a few pictures. For the pictures of the newer version ( B4.04.27.1) of PS3Eye camera featuring OV538 chip scroll down.This tutorial applies to both versions of PS3Eye camera an that, e note that camera sensor is very sensitive to the IR light which makes it even more attractive (besides the high capture frame rates) for these applications. This is the older version of PS3Eye camera and features the OV534 USB controller chip. The pictures used in this tutorial refer to the camera version B3.04.06.1. This tutorial is only for experienced users who are interested in using the PS3Eye camera for computer vision applications.
#PS3 EYE CAM IR FILTR SOFTWARE#
This tutorial is only for experienced users who are interested in using the PS3Eye camera for computer vision.Īfter playing with the software part and getting PS3Eye to capture under Windows, we decided to see how difficult is to remove the IR blocking filter from the lens of this camera.
#PS3 EYE CAM IR FILTR INSTALL#
Getting these curves right is absolutely essential for best performance in Game.I don't use Facetrack NoIR so cannot give you any examples.Īlternatively, Install Freetrack and ask for sample set ups.lots of people use Freetrack with a PS3 eye cam.Īlternatively, Install Freetrack and ask for sample set ups.lots of people use Freetrack with a PS3 eye cam.[/QUOT Next.Select the Model Tab and select Clip since you are using a vertical LED setup (Delan)įinally, on the lower right is the Curves Tab.select this and adjust the curves for the best response that you are comfortable with. Now click on the Settings option directly underneathįirst.Camera adjust the Threshold slider for the best exposure without stray light interference
![ps3 eye cam ir filtr ps3 eye cam ir filtr](https://i.ebayimg.com/images/g/r9UAAOSwyKtg8N~h/s-l225.jpg)
Make sure that PointTracker 1.0 is showing in the drop down box - if not select it. On the left is section Marked Tracker Source (1st=Master) On the bottom right of the Facetrack interface enable the Start with your mouse. You should see only the three LED's nicely depicted and no stray light interference. Set Gain slider fully left, exposure slightly right and white balance sliders in the middle I just set facetrack NoIR with the pointracker addon to work with my PS3 eyecam, heres what I did:-ġ Run Cleye test and selected Option Tab then - Video Cap Filter